PO Box 388
Halfway House, 1685

Tel: +27 (0)11 314 3950
Fax: +27 (0)86 690 6140
Cell: 082 507 9887

Email: info@cwrmglobal.co.za

“20 YEARS” LUBRICATING ROPES WITH OIL FOR LONGER ROPE LIFE

Cold Jet Dry Ice Equipment

Dry Ice Blasters

Aero 40 Dry Ice Blast Cleaning System
The Aero 40 Dry Ice Blast Cleaning System comes complete with one length of blast hose, one length of air hose, standard applicator, customer specified nozzle with handle (if applicable), nozzle hanger, hose wrap (qty 2), and hose carrier (qty 2). Click here to read more on the Aero 40 Dry Ice Blast Cleaning System.
Aero 80 Series Dry Ice Blast Cleaning Systems

The Aero 80 Series Blast Systems comes complete with one length of blast hose, one length of air hose, standard applicator (applicator with light for Aero 80 DX and Aero 80 HP), customer specified nozzle with handle (if applicable), static bond cable, nozzle hanger, hose wrap (qty 2), hose carrier (qty 2), and the following items for the Aero 80 DX and Aero 80 HP: hose hangers (right and left), cord wrap, extension cord, retractable static ground reel and dry ice recycling bag. Click here to read more on the Aero 80 Series Dry Ice Blast Cleaning Systems.

Aero C100 Dry Ice Blast Cleaning System

The Aero C100 Dry Ice Blast System comes complete with one length of blast hose, one length of air hose, standard applicator, customer specified nozzle with handle (if applicable), nozzle hanger, static bond cable, hose wrap (qty 2), hose carrier (qty 2), and food grade oil (1 qt/litre). Click here to read more on the Aero C100 Dry Ice Blast Cleaning System.

i³ MicroClean Dry Ice Blast Cleaning System
The i³ Series utilizes Cold Jet's patented shaved ice and feeder technology. Both our pneumatic (SDI-5) and precision electric (i³ MicroClean) options deliver a comprehensive and precise cleaning solution for delicate substrates. No other system on the market cleans so powerfully, yet so gently. This revolutionary table-top cleaning system capitalizes on Cold Jet's patented shaved ice and feeder technologies to deliver a complete precision cleaning solution. The i³MicroClean thoroughly cleans small, complex cavities and crevices that other methods cannot reach, as well as cleaning delicate surfaces faster than traditional cleaning methods - without abrasion or disassembly.
Learn more about the i³MicroClean...

Block/ Reformer Systems

i³ IcePress
The amazing new i³ IcePress allows you to make high quality blocks from any form (and any condition) of dry ice - wherever and whenever you need it. Use pellets, use old ice, use scrap ice - and make high quality blocks in as little as 3 minutes. And the IcePress is portable and all-pneumatic, so it can go where you go.
Learn more about the i³ IcePress...

Pellet Production Systems (Pelletizers)

P325 Pelletizer
Automatic pellet production capability of up to 300 lbs (136.4 kg) of dry ice per hour. Choice of 3 mm high-density pellets, and 6 mm, 9 mm, 13 mm, and 16 mm nuggets.
Learn more about the P325 Pelletizer...
P750 Pelletizer
Automatic pellet production capability of up to 600 lbs (272.7 kg) of dry ice per hour. Choice of 3 mm high-density pellets, and 6 mm, 9 mm, 13 mm, 16 mm or 19 mm nuggets.
Learn more about the P750....

Production Accessories (Pelletizers)

Die Plates
High-Density Die Plates
Allow your dry ice production equipment to meet all your production needs with the proper pellet or nugget die plate. Cold Jet's pelletizers can be properly outfitted to ensure optimal performance and reliability.
Interchangeable die plates available in the following sizes: -
3mm, 6mm, 9mm, 13mm, 16mm and 19mm

Nozzles and Accessories for Blasting Machines

Low Flow Nozzles
Straight or angled low flow nozzles designed to produce powerful cleaning capabilities for those whose need requires low air consumption.
"J" Hook Nozzle
160° Access, Full pressure, plastic coated stainless steel nozzle with a horizontal blast swath.
 
510 SLF
Low flow 10" (25.4 cm) nozzle producing powerful cleaning with low air consumption.
 
523 SLF
Low flow 23" (58.4 cm) nozzle producing powerful cleaning with low air consumption.
 
MS-071 Nozzle
90° Access, Full pressure, plastic coated stainless steel nozzle with a vertical blast swath.
 
MS-136 Nozzle
90° Access, Full pressure, plastic coated stainless steel nozzle with a horizontal blast swath.
 
MS-171 Nozzle
45° Access, Full pressure, plastic coated stainless steel nozzle with a horizontal blast swath.
 
TN-183
Low flow nozzle producing powerful cleaning with low air consumption-ideal for cleaning deep cavities.
 
TN-312
Ideal for cleaning deep-cavity injection moulds.
   
Medium Flow Nozzles
Full pressure nozzles with the maximum amount of aggression available. Ideal for low-flow and low-pressure air systems. The longer the nozzle length, the more aggressive the blasting. The blast swath width determines the ice distribution onto the cleaning surface.
223 SL
Medium flow 3" (7.6 cm) blast swath produces maximum performance for low-pressure air systems.
 
224 DF
Medium flow, 4" (10.2 cm) blast swath fragmenting pellets to resemble shaved ice particles.
 
307 BL
45° Access, Full pressure, plastic coated stainless steel nozzle with a blast swath of 0.75" (1.9 cm).
 
402 SL
Medium flow 1" (2.5 cm) blast swath produces maximum performance for low-pressure air systems.
 
403 SL
Medium flow 1/2" (1.3 cm) blast swath produces maximum performance for low-pressure air systems.
 
412 SL
1" (2.5 cm) blast swath - ideal for any application requiring an aggressive blast.
 
413 DF
Medium flow, 1.8" (4.6 cm) blast swath fragmenting pellets to resemble shaved ice particles.
 
413 SL
1.8" (4.6) blast swath - ideal for removing wax release agents from polyurethane foam moulds.
 
508 SL
3/4" (1.9 cm) blast swath - ideal for removal of meld release agents.
 
523 SF
1" (2.5 cm) blast swath and 23" (58.4 cm) is best suited for aggression at most pressure levels.
 
523 SF.2
Medium flow 2" (5.1 cm) blast swath produces maximum performance for low-pressure air systems.
 
807 SL
2" (5.1 cm) wide cleaning blast swath - ideal for general degreasing and industrial clean-ups.
 
TN-302
1/2" (1.3 cm) blast swath - will not harm delicate tooling, ideal for cleaning deep-cavity moulds.
   
Speciality High Flow Nozzles
High flow performance nozzles are ideal for cleaning applications that require high aggression. These nozzles have high air consumption - between 150 to 215 SCFM (4.3 - 6.1 m³/min) at 80 psi (5.5) bar.
523 Stealth
Lightweight nozzle with a 1" (2.5 cm) blast swath polymer construction will not damage surfaces.
 
533 SF
Ideal nozzle for contractors due to its high aggression 1" (2.5 cm) blast swath.
 
533 SF.2
High-aggression nozzle with 2" (5.1 cm) blast swath - ideal for contractors.
 
902 BL
90° nozzle utilizes an air jet, opposite in direction to the blast stream, to balance nozzle
 
TN-182
3 blast openings allow full circumferential cleaning - ideal for walls of deep-cavity moulds and recessed areas.
   
i³ MicroClean Nozzles
Cold Jet offers a selection of precision blast nozzles for the i³MicroClean with rectangular or round blast swaths as well as a reverse-flow 155° nozzle. Air consumption is 12-50 cfm (0.3-1.5 m³/min) at 100 psi (6.9 bar) blast pressure.
12 cfm (0.3 m³/min), 6" (15 cm) Long Fan
1/4" (6 mm) blast swath.
 
12 cfm (0.3 m³/min), 6" (15 cm) Long Fan
Variable high flow fan nozzle -1/2" (13 mm) blast swath.
 
12 cfm (0.3 m³/min), 9" (23 cm) Long
1/8" (3.2 mm) blast swath.
 
12 cfm (0.3 m³/min), 6" (15 cm) long
1/8" (3.2 mm) blast swath.
 
155° Reverse Flow
Blasts at a reverse angle to reach behind ridges of confined spaces.
 
25 cfm (0.7 m³/min), 9" (23 cm) Long
3/16" (4.7 mm) blast swath.
 
25 cfm (0.7 m³/min), 6" (15 cm) Long
3/16" (4.7 mm) blast swath.
 
50 CFM (1.4 m³/min), 6" (15 cm) Long
5/16" (7.9 mm) blast swath.
 
50 cfm (1.4 m³/min), 9" (23 cm) Long
5/16" (7.9 mm) blast swath.
 
MC28
25 cfm (0.7 m³/min), 6" (15 cm) long and blast swath of .28" (0.7 cm)
 
MC35
25 cfm (0.7 m³/min), 6" (15 cm) long and blast swath of .35" (0.9 cm)
 
MC47
25 cfm (0.7 m³/min), 6" (15 cm) long and blast swath of .47" (1.2 cm)
   
Blasting Applicators
Achieve optimal blasting performance with the right applicator for your dry ice blasting system. Cold Jet offers applicators that are ergonomically designed for comfort, safety and simplicity, allowing for better control of blasting power.
Single-Speed Applicator
Lightweight applicator allows easy control of blasting power.
 
Tri-Mode Speed Applicator
3-position feed control switch applicator allows control of blasting power.
 
Tight Access Applicator
Simple & easy design for better control of blasting in tight access areas.
 
Tight Access Applicator w/ Quick Change Module
Better control of blasting in tight areas - Module accommodates all nozzles.
 
i³MicroClean Enhanced Blast Applicator
Ergonomic designed applicator with rotating head and LED lights.
 
i³MicroClean Standard Blast Applicator
Ergonomic designed for better control of blasting in tight access areas.
 
Dual Hose Applicator
Ergonomic design allows blasting for long periods of times at blast pressures up to 125 psi (8.6 bar).
 
Foot Switch Applicator
Allows the nozzle to be attached directly to the blast hose.
 
Remote Switch Applicator
Connects directly to blast control cable for remote start/stop.

 


Copyright © CWRM
Website design by EngNet Design Group
 
Contact Us

Tel:  +27 11 314 3950
Fax: +27 11 314 3935

Cell: 082 507 9887

Email CWRM

Postal Address:
P.O. Box 388,
Halfway House,
1685

 

 

Rental Payment Facility

What is a Rental?

Rental: (noun) – an agreement where a payment is made for the temporary use of an asset owned by another person / company.

A rental is more than just a definition in a dictionary; it is a means of obtaining the use of the most up-to-date technology with the least capital outlay.

CWRM offer a Rental Payment facility over 36, 48 and 60-month term.

At the end of the term, the asset is passed onto the company by one additional monthly payment.
Where applicable, estimated monthly repayments are included in every quotation submitted.